If you have been quilting, then using a rotary cutter must have been part of your routine. You go prep your fabric, measure the pattern you need, then you are set to cut. However, have you ever come across a problem where after cutting you really haven’t cut through all the fabric? Especially, at the beginning. And if you are planning to just rip off the fabric because it is only a small part that was not cut, then you are making a mistake here. As a result, you are going to end up with wonky edges that are starting to fray. On the other hand, I will share with you a quick rotary cutting tip for quilters. When cutting with a rotary cutter, always begin cutting before the fabric. In this way, you are able to cut everything. Now, that’s a quick fix right there! Happy quilting!